» Click Here To See Future Forecast

New Holland H7320

New Holland H7320 for sale at Kings River Tractor Inc.

Double tap to zoom

New Holland H7320 for sale at Kings River Tractor Inc.




You can rely on genuine Discbine® H7000 Series disc mower-conditioners for smooth, trouble-free mowing, even in tough conditions.


ShockPRO™ disc hubs protect the cutterbar by absorbing harmful impacts and can be changed quickly so you’re back making hay quickly.


Choose the best conditioning system for your crops – chevron form rubbers rolls, steel rolls or advanced LeaningEdge™ flail tines.


Close, clean cutting is standard with H7000 Discbine® trailed mower-conditioners. The MowMax disc cutterbar mows at a height of less than one inch, which makes your tall hayfields look like close-cut lawns after you’re finished mowing. Low-profile-design rock guards allow the cutterbar to run at a shallower angle on the ground for less wear, less damage and a more consistent cut height. The Discbine® disc head is suspended independently from the trail frame, allowing it to closely follow changing ground contours and reducing stubble damage and skid shoe wear. Use the adjustable disc header flotation springs and the 2- to 10-degree cutting angle adjustment to cut your valuable crop. A mechanical cutting angle adjustment is standard on 9’ 2’’ models, but a hydraulic control is provided as standard on 10’ 4’’ models for precision on-the-go cutting height adjustments.


New Holland-Disc Cutterbar  
Type MowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m) 9' 2" (2.8)
Number of discs 7
Number of knives 14 (2 per disc)
Disc Speed, rpm 3000
Cutting angle 2 to 10 degrees
Hydraulic Cutting angle control Optional
Standard Cutting height skid shoe, in. (mm) Standard 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe Optional  2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe -
BioMass skid shoe -
Ground clearance with header fully raised, in. (mm) 17" (432)
Cutterbar Flotation Vertical and lateral, adjustable springs
QuickMax™ Knife Change System -
ShockPro™ Disc Drive Hub protection system Standard
MowMax™ 3-year cutterbar protection plan Standard
Chevron-Design Roll Conditioner  
Chevron-Design Roll Conditioner -
Type. -
Roll Length, in. (mm) -
Roll Diameter, in. (mm) -
Roll Drive -
Roll Speed, rpm -
Roll Pressure System -
Conditioner Intensity Adjustment -
LeaningEdge™ Flail Conditioner  
LeaningEdge™ Flail Conditioner Standard
Number of LeaningEdge flails 90
Semi-Swinging LeaningEdge flail design Standard
Rotor Diameter, in. (mm) 22 (560)
Standard Speed, rpm 1016
Optional Slow Speed, rpm 730
Drive. 4 HB V-belt
Conditioner Intensity Adjustment. Single crank adjustable rotor hood
Optional Textured Hood Liner Kit Optional
Standard Drawbar Standard
Drawbar Swivel Hitch -
2-pt Swivel Hitch -
Height, Transport, ft. in. (m) 5' 8" (1.7)
Height, Operating, ft. in. (m) 4' 5" (1.3)
Width, Transport, ft. in. (m) 9' 11" (3.0) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m) 14' 10" (4.52)
Width, Operating 2-pt Swivel Hitch, ft. in. (m) -
Width, Operating Drawbar Swivel Hitch, ft. in. (m) -
Length, Transport, Standard Drawbar Hitch, ft. in. (m) 17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m) -
Length, Transport, Drawbar Swivel Hitch, ft. in. (m) -
Length, Operating, Standard Drawbar Hitch, ft. in. (m) 17' 2" (5.2)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m) -
Length, Operating Drawbar Swivel Hitch, ft. in. (m) -
Weight, Operating lbs. (kg) 3,740 (1696)
Drive 540 rpm PTO, enclosed gears and four HB belt
Drive Protection  
Drive Protection Slip clutch and over-running clutch
Hydraulic swing Standard (double-acting cylinder)
Operating Position Side-Pull, Right Side
Hydraulic lift Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt Optional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge  
Swath, ft. (mm) 6 (1829)
Windrow, ft. (mm) Adjustable from 3 to 6 (914 to 1829)
Wide Thin Fin Kit (100 % Coverage) Optional
Operating, mph (kph) 0 to 9 (0 to 14.5)
Transport, mph (kph) 20 (32)
Tractor Requirement  
Tractor Requirement 65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valves All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires  
Size 9.5L x 14 6PR